Programming and Decoding


















AE-1/AE-2 Keyboard Programmer

•  Will Program
......The.AE-1 or
......The AE-2

•  Self-Contained
•  Practical for
......field Use
•  May Be Used
......As a DTMF
......Test
......Generator

•  Hi z Output
•  Low z Output
......-2db @ 600
......ohms
•  Internal
......
Sounder
•  Will Replicate
......Pipo ANI 4.0
......Programming
......Functions


Programming the AE-1 is achieved by loading the digits and string commands into the AE-1/AE-2 Keyboard Programmer and then loading them into the AE-1. Memory position 1 of the Programmer represents ANI. Memory position 2 of the Programmer represents ENI. Each position or memory has a 30-digit capacity, but may be expanded in the ANI (memory 1) and/or ENI (memory 2) by using MEMORY CONNECT to POSITIONS 3 to 6 of the Programmer for a total of 180 digits.

Programming the AE-2 is achieved in the same manner with the exception that the AE-2 has 6 memories. The Programmer corresponds directly to the AE-2 with MEMORY 1 to 6, 30 digits each, 180 total.

AE-1/AE-2 PC Interface Box

•  Interfaces With A
......PC Via Serial
......Port
•  Pipo Software
......Supplied
•  Easy To Read
......DTMF String
......Commands On
......Screen
•  Operates From
......MS DOS

•  Configurations May
......Be Saved On Disk
•  Storage System For
......Up To 60 Config.
......Files
•  Files May Be Sent
......On Disk or Via
......E-mail
•  Pipo Will Assist
......With Proging. and
......Transfer File Via
......
E-mail






Programming the AE-1 and AE-2 is achieved with Pipo-supplied software and the PC Interface Box. Programming is simplified due to on-screen display of the string commands. A convenient on-screen filing system is available to store files that belong to individual systems or applications. When reprogramming a system or making changes, the configuration is stored in a file. If help is needed with programming, Pipo will assist and can also send the file via e-mail or on disk.

PD-822 DTMF Display Decoder

The PD-822 is a DTMF Decoder designed to decode and display the DTMF NUMBERS being sent from the AE-1 or the AE-2. It offers a wide dynamic input range with an excellent tolerance for twist and noise. The display will show up to 8 digits at a time allowing many selective and identification options to be designed into a system. One of the special features of the PD-822 is that it is designed to detect a ROUTINE DTMF signal and an ALERT or ENI DTMF signal just by using a different prefix. For status monitoring, or managing a fleet or system, an ending digit may be displayed to indicate status or position. Using different prefixes enables the system organizer or planner to set up his fleet or system to detect multiple systems on the same frequency or input line by adding additional
PD-822’s. More detailed information and application ideas may be obtained by requesting a PD-822 Manual from Pipo.
•  Ideal For ANI/ENI, Fleet Management or Status
......Indication
•  8-Digit Display  •  Decodes All 16 Digits
•  Decodes .5 to 20 DPS  •  Audible Alarm
•  Decodes 1 to 8 Digits In Length

•  Transistor Output For External Alarm
•  Form-C Relay For DTMF Speaker Muting
•  Wide Input Range 30-2500 mV rms

•  Parallel Output Port—Interfaces Directly To Printer
•  Serial Output Port—Interfaces Data To Any
......Computer





Applications



Copyright © 1999-2017 Pipo Communications. All Rights Reserved.